| Electrical Characteristics | Contact Resistance | Measured at small current (100mA or less) 1000Hz | 40m Max |
| Insulation Resistance | Apply a voltage of 100V DC for 1 min | 100M Min |
| Dielectric Strength | AC 100V rms (50~60Hz) for 1 min, Trip Current: 0.5mA | Without damage to parts, arcing or breakdown etc. |
| Mechanical Performance | Connection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 0.5~2.0 Kgf |
| Disconnection Force | Measurement shall be made after connecting and disconnecting using standard plug gauge 3 times. | 0.6~2.04 Kgf |
| Durability | Life Test (No Load) | Connection and disconnection for 5000 cycles at a speed of 10 to 25 cycles/min | Contact Resistance 0.1, Disconnection Force 0.8 to 2.0N |
| Durability | Life Test (With Load) | Connection and disconnection for 5000 cycles at a speed 10 to 20 cycles/min | Contact Resistance 0.1, Disconnection Force 0.8 to 2.0N |
| Soldering Test | Solderability Test | Terminals dipped 1mm in solder bath of 2505 for 50.5 seconds | Solder wetting time 3 seconds, Soldering area > 75% |
| Soldering Test | Resistance to Soldering Heat Test (Reflow) | Preheat to 180 (120s), Peak temp 2605 (within 20s) | No deformation, meets electrical characteristics |
| Soldering Test | Resistance to Soldering Heat Test (Soldering Iron) | Bit temp 3305, Application time 30.5 seconds | No deformation, meets electrical characteristics |
| Environmental Test | Humidity Test | 402, 90% to 96% RH for 96 Hr, then 1 Hr at standard conditions | No damage on appearance, meets mechanical and electrical characteristics |
| Environmental Test | Heat Test | 702 for 96 hours, then 1 Hr at room temperature | No damage on appearance, meets mechanical and electrical characteristics |
| Environmental Test | Cold Test | -253 for 96 hours, then 1 Hr at room temperature | No damage on appearance, meets mechanical and electrical characteristics |
| Environmental Test | Temperature Cycling Test | 5 cycles of specified conditions (e.g., 8 hours at 70, then -20) | No deformation/cracks, Insertion/Extraction Force: 3 to 20N, Contact Resistance: Max. 30m, Insulation Resistance: Min. 100 M, Dielectric Withstanding Voltage: 100VAC/min |
| Environmental Test | Cold & Heat Shock Test | 5 cycles of specified conditions (e.g., 1 hour at 70, then -20) | No deformation/cracks, Insertion/Extraction Force: 3 to 25N, Contact Resistance: Max. 30m, Insulation Resistance: Min. 100 M, Dielectric Withstanding Voltage: 500VAC/min |
| Rating | Rated Voltage | - | 20V |
| Rating | Rated Current | VBUS: 3A, GND: 1.25A, Others: 0.25A | - |
| Operating Environment | Temperature Range | - | -30 to +80 |
